{"title":"Compounds \u0026 Polishes","description":"","products":[{"product_id":"flat-top","title":"Flat Top - 16oz.","description":"\u003ch1\u003eCUT HARD CLEAR COAT WITH EASE.\u003c\/h1\u003e\n\u003cp\u003eFlat Top is our hard clear coat compound, built with a short cycle time that gives a very aggressive cut and an easy, dry wipe-off. Its standout feature is triple-filtered agglomerates: the abrasives are tumbled and purified three times over, so as they break down they refine the finish instead of marring it. The result is a strong cut that finishes to a near-mirror on tough European-style clears, all on a dual action.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive cut on hard clear:\u003c\/strong\u003e Designed specifically for the hard clear coats that resist correction, like Mercedes and Audi.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple-filtered agglomerates:\u003c\/strong\u003e Smooth, refined abrasive edges that polish as they diminish for a clean finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry emulsion, easy wipe-off:\u003c\/strong\u003e A semi-odorless, lower-toxicity solvent and effortless removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e A microfiber cutting pad on a dual action.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual action machine:\u003c\/strong\u003e Built for a DA. On a rotary it flashes and dries fast, which is why we run it on a dual action.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrime the pad with an outer and inner circle of product, worked into the pad.\u003c\/li\u003e\n\u003cli\u003eSpread over a 2 ft by 2 ft area. Set the dual action to speed 5.\u003c\/li\u003e\n\u003cli\u003eMake 2 slow passes with moderate pressure.\u003c\/li\u003e\n\u003cli\u003eClean the pad, add 4 dime-size dots, and cycle the same section with no pressure for 2 passes.\u003c\/li\u003e\n\u003cli\u003eWipe and follow with a polish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSlow passes with moderate pressure give the most cut. Faster passes cut less.\u003c\/li\u003e\n\u003cli\u003eBrush out or clean the pad between sets so the cut stays even.\u003c\/li\u003e\n\u003cli\u003eAlways follow with Classic Polish on an HDO orange foam pad to remove any light haze.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":4150957187,"sku":"SHS501-01-001","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/products\/Z-221011-Shine_Flat_Top_16oz.jpg?v=1666215028"},{"product_id":"classic-cut","title":"Classic Cut - 16oz.","description":"\u003ch1\u003eNO FILLERS. CLEAR CUT.\u003c\/h1\u003e\n\u003cp\u003eClassic Cut is our everyday diminishing-abrasive compound and the one we run on roughly 90% of the cars that come through the shop. It removes moderate scratches and defects, then breaks down as you work it to leave a clean, clear finish. Built with zero fillers and a low-dusting formula, it holds up in sun, heat, and humidity, which makes it the workhorse you reach for first on most soft and hard clear coats.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiminishing abrasive:\u003c\/strong\u003e The first passes cut hard to knock down defects, then the abrasives break down finer to refine the finish in the same set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo fillers, no hiding:\u003c\/strong\u003e Silicone free and wax free, so what you correct is real, not defects masked under oils that wash away later.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow dusting:\u003c\/strong\u003e Stays put on the panel and the pad instead of coating your whole work area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e Microfiber cutting pad or the Tango microfiber cutting pad on a dual action, or a wool pad on a rotary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks in the heat:\u003c\/strong\u003e The formula keeps cycling in direct sun, warm temperatures, and humidity without flashing or drying out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrime the pad with an outer and inner circle of product and rub it thoroughly into the pad face.\u003c\/li\u003e\n\u003cli\u003eSpread the product over a 2 ft by 2 ft area. Set your dual action to speed 5.\u003c\/li\u003e\n\u003cli\u003eMake 2 slow passes with moderate down pressure.\u003c\/li\u003e\n\u003cli\u003eBlow out or clean the pad, apply 4 dime-size dots, and cycle the same section with no pressure for 2 passes.\u003c\/li\u003e\n\u003cli\u003eWipe with a clean microfiber towel. Compound the whole vehicle before moving on to your polish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSlow arm speed with moderate pressure gives the most cut. Faster passes cut less, not more.\u003c\/li\u003e\n\u003cli\u003eWhen the product turns almost clear, the abrasives are broken down and the pass is finished.\u003c\/li\u003e\n\u003cli\u003eFollow with Classic Polish on an HDO orange foam pad for harder clears or heavy haze, or Classic Finish Plus for soft clears with minimal haze.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":4151867203,"sku":"SHS499-01-001","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/products\/Z-221011-Shine_Classic_Cut_16oz.jpg?v=1666214276"},{"product_id":"classic-polish","title":"Classic Polish - 16oz.","description":"\u003ch1\u003ePOLISH WITH A KICK.\u003c\/h1\u003e\n\u003cp\u003eClassic Polish is a diminishing-abrasive polish with a minor cutting ability, which lets it pull out heavier haze and polish harder clear coats while still finishing crystal clear in one step. The long cycle time makes it versatile: run it as a final polish on harder clears and heavy haze, or as a light compound on a newer vehicle. Non-filling and silicone free, it is one of the most useful bottles in the lineup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinor abrasive, real range:\u003c\/strong\u003e Enough cut to clear heavy haze or lightly correct, then it finishes down to a clean, glossy result.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong cycle time:\u003c\/strong\u003e Stays workable, so you control the finish through your passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo fillers:\u003c\/strong\u003e Crisp, true reflections you can trust, not a temporary shine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e HDO orange foam or the EdgeGuard yellow pad for polishing. For light correction, a microfiber polishing pad or the Tango microfiber polishing pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for super-soft clears:\u003c\/strong\u003e It is not as fine as Classic Finish Plus. On very soft clear coats, use Classic Finish Plus on a black foam pad since it is finer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFinal polish\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply 2 to 3 dots to prime the pad.\u003c\/li\u003e\n\u003cli\u003eUse light down pressure on your first pass, then lighten up.\u003c\/li\u003e\n\u003cli\u003eCycle the product until it goes clear, then wipe off and inspect.\u003c\/li\u003e\n\u003cli\u003eIf you still have haze, recycle the section with a faster arm speed, check it, and move on to the next panel.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eLight correction\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse the Tango or a microfiber polishing pad. Prime the pad first, working the product into the fibers.\u003c\/li\u003e\n\u003cli\u003eCorrect the panel just as you would with a normal compound.\u003c\/li\u003e\n\u003cli\u003eFollow with Classic Finish Plus on a black foam pad for softer clears, or Classic Polish on an HDO orange foam pad to polish out any light marring from the correction step.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eA spritz of Shine Mist extends the cycle and helps the polish finish down.\u003c\/li\u003e\n\u003cli\u003eFollow with Classic Finish Plus on a black foam pad for soft clear coats, or jump straight to your protection of choice (ceramic coating or wax).\u003c\/li\u003e\n\u003cli\u003eKeep it on a dual action for the best, most controllable finish.\u003c\/li\u003e\n\u003cli\u003eWorks on all paint types.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":4152584835,"sku":"SHS496-01-001","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/products\/Z-221011-Shine_Classic_Polish_16oz.jpg?v=1666214356"},{"product_id":"heavy-cut","title":"Heavy Cut - 32oz.","description":"\u003ch1\u003eSHRED THROUGH OXIDATION.\u003c\/h1\u003e\n\u003cp\u003eHeavy Cut is our only non-diminishing-abrasive compound, built to remove heavy oxidation from gel coat. Because it does not diminish, you will always need to follow it with a refining step. It holds its cutting power through a long buffing cycle and will not dry out in direct sun, so it tears through heavy oxidation and sand scratches the fast, efficient way on boats, motorhomes, and any chalky gel-coat surface.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-diminishing abrasive:\u003c\/strong\u003e Holds consistent bite from the first pass to the last instead of softening as you work, so always follow it with a refining step.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for gel coat:\u003c\/strong\u003e Formulated for the severe oxidation and hardness of gel coat and fiberglass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong buffing cycle:\u003c\/strong\u003e Keeps working in direct sun without flashing or drying out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e The Dock Boss Heavy Cut wool pad on a rotary, or a microfiber cutting pad on a dual action.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks best on a rotary:\u003c\/strong\u003e It compounds gel coat most efficiently on a rotary. You can use a dual action if you do not have a rotary, but it works best on a rotary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRotary (primary)\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse the Dock Boss Heavy Cut wool pad.\u003c\/li\u003e\n\u003cli\u003eCompound the gel coat to pull out the oxidation and scratches, keeping a controlled arm speed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eDual action\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse a cutting pad and work the section. Expect it to take more effort than on a rotary.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFor the best finish, after compounding step down to Chop Top on a Deck Hand wool pad, then follow with Wake Up on the Correcting Marine Foam Pad.\u003c\/li\u003e\n\u003cli\u003eFor good results, run Heavy Cut on a Dock Boss wool pad, then follow with Wake Up on a Correcting Marine Foam Pad.\u003c\/li\u003e\n\u003cli\u003eKeep your pad clean with the Pad Cleaning Spur so the cut stays even.\u003c\/li\u003e\n\u003cli\u003eBuilt for gel coat.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":4149629187,"sku":"SHS387-01-002","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/files\/Heavy-Cut-32oz-Studio.jpg?v=1745250371"},{"product_id":"heavy-cut-gallon","title":"Heavy Cut - Gallon","description":"\u003ch1\u003eSHRED THROUGH OXIDATION.\u003c\/h1\u003e\n\u003cp\u003eHeavy Cut is our only non-diminishing-abrasive compound, built to remove heavy oxidation from gel coat. Because it does not diminish, you will always need to follow it with a refining step. It holds its cutting power through a long buffing cycle and will not dry out in direct sun, so it tears through heavy oxidation and sand scratches the fast, efficient way on boats, motorhomes, and any chalky gel-coat surface.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-diminishing abrasive:\u003c\/strong\u003e Holds consistent bite from the first pass to the last instead of softening as you work, so always follow it with a refining step.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for gel coat:\u003c\/strong\u003e Formulated for the severe oxidation and hardness of gel coat and fiberglass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong buffing cycle:\u003c\/strong\u003e Keeps working in direct sun without flashing or drying out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e The Dock Boss Heavy Cut wool pad on a rotary, or a microfiber cutting pad on a dual action.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks best on a rotary:\u003c\/strong\u003e It compounds gel coat most efficiently on a rotary. You can use a dual action if you do not have a rotary, but it works best on a rotary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRotary (primary)\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse the Dock Boss Heavy Cut wool pad.\u003c\/li\u003e\n\u003cli\u003eCompound the gel coat to pull out the oxidation and scratches, keeping a controlled arm speed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eDual action\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse a cutting pad and work the section. Expect it to take more effort than on a rotary.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFor the best finish, after compounding step down to Chop Top on a Deck Hand wool pad, then follow with Wake Up on the Correcting Marine Foam Pad.\u003c\/li\u003e\n\u003cli\u003eFor good results, run Heavy Cut on a Dock Boss wool pad, then follow with Wake Up on a Correcting Marine Foam Pad.\u003c\/li\u003e\n\u003cli\u003eKeep your pad clean with the Pad Cleaning Spur so the cut stays even.\u003c\/li\u003e\n\u003cli\u003eBuilt for gel coat.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":4150081283,"sku":"SHS387-01-003","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/files\/HeavyCUt.jpg?v=1745254533"},{"product_id":"classic-cut-32oz","title":"Classic Cut - 32oz.","description":"\u003ch1\u003eNO FILLERS. CLEAR CUT.\u003c\/h1\u003e\n\u003cp\u003eClassic Cut is our everyday diminishing-abrasive compound and the one we run on roughly 90% of the cars that come through the shop. It removes moderate scratches and defects, then breaks down as you work it to leave a clean, clear finish. Built with zero fillers and a low-dusting formula, it holds up in sun, heat, and humidity, which makes it the workhorse you reach for first on most soft and hard clear coats.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiminishing abrasive:\u003c\/strong\u003e The first passes cut hard to knock down defects, then the abrasives break down finer to refine the finish in the same set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo fillers, no hiding:\u003c\/strong\u003e Silicone free and wax free, so what you correct is real, not defects masked under oils that wash away later.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow dusting:\u003c\/strong\u003e Stays put on the panel and the pad instead of coating your whole work area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e Microfiber cutting pad or the Tango microfiber cutting pad on a dual action, or a wool pad on a rotary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks in the heat:\u003c\/strong\u003e The formula keeps cycling in direct sun, warm temperatures, and humidity without flashing or drying out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrime the pad with an outer and inner circle of product and rub it thoroughly into the pad face.\u003c\/li\u003e\n\u003cli\u003eSpread the product over a 2 ft by 2 ft area. Set your dual action to speed 5.\u003c\/li\u003e\n\u003cli\u003eMake 2 slow passes with moderate down pressure.\u003c\/li\u003e\n\u003cli\u003eBlow out or clean the pad, apply 4 dime-size dots, and cycle the same section with no pressure for 2 passes.\u003c\/li\u003e\n\u003cli\u003eWipe with a clean microfiber towel. Compound the whole vehicle before moving on to your polish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSlow arm speed with moderate pressure gives the most cut. Faster passes cut less, not more.\u003c\/li\u003e\n\u003cli\u003eWhen the product turns almost clear, the abrasives are broken down and the pass is finished.\u003c\/li\u003e\n\u003cli\u003eFollow with Classic Polish on an HDO orange foam pad for harder clears or heavy haze, or Classic Finish Plus for soft clears with minimal haze.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":4151810883,"sku":"SHS499-01-002","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/files\/Classic_Cut_32oz_41a2d269-061a-4301-9791-7a1a2fc88a44.jpg?v=1689273818"},{"product_id":"classic-cut-gallon","title":"Classic Cut - Gallon","description":"\u003ch1\u003eNO FILLERS. CLEAR CUT.\u003c\/h1\u003e\n\u003cp\u003eClassic Cut is our everyday diminishing-abrasive compound and the one we run on roughly 90% of the cars that come through the shop. It removes moderate scratches and defects, then breaks down as you work it to leave a clean, clear finish. Built with zero fillers and a low-dusting formula, it holds up in sun, heat, and humidity, which makes it the workhorse you reach for first on most soft and hard clear coats.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiminishing abrasive:\u003c\/strong\u003e The first passes cut hard to knock down defects, then the abrasives break down finer to refine the finish in the same set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo fillers, no hiding:\u003c\/strong\u003e Silicone free and wax free, so what you correct is real, not defects masked under oils that wash away later.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow dusting:\u003c\/strong\u003e Stays put on the panel and the pad instead of coating your whole work area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e Microfiber cutting pad or the Tango microfiber cutting pad on a dual action, or a wool pad on a rotary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks in the heat:\u003c\/strong\u003e The formula keeps cycling in direct sun, warm temperatures, and humidity without flashing or drying out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrime the pad with an outer and inner circle of product and rub it thoroughly into the pad face.\u003c\/li\u003e\n\u003cli\u003eSpread the product over a 2 ft by 2 ft area. Set your dual action to speed 5.\u003c\/li\u003e\n\u003cli\u003eMake 2 slow passes with moderate down pressure.\u003c\/li\u003e\n\u003cli\u003eBlow out or clean the pad, apply 4 dime-size dots, and cycle the same section with no pressure for 2 passes.\u003c\/li\u003e\n\u003cli\u003eWipe with a clean microfiber towel. Compound the whole vehicle before moving on to your polish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSlow arm speed with moderate pressure gives the most cut. Faster passes cut less, not more.\u003c\/li\u003e\n\u003cli\u003eWhen the product turns almost clear, the abrasives are broken down and the pass is finished.\u003c\/li\u003e\n\u003cli\u003eFollow with Classic Polish on an HDO orange foam pad for harder clears or heavy haze, or Classic Finish Plus for soft clears with minimal haze.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":4151018627,"sku":"SHS499-01-003","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/products\/Z-221011-Shine_Classic_Cut_Gallon.jpg?v=1666214337"},{"product_id":"classic-polish-32oz","title":"Classic Polish - 32oz.","description":"\u003ch1\u003ePOLISH WITH A KICK.\u003c\/h1\u003e\n\u003cp\u003eClassic Polish is a diminishing-abrasive polish with a minor cutting ability, which lets it pull out heavier haze and polish harder clear coats while still finishing crystal clear in one step. The long cycle time makes it versatile: run it as a final polish on harder clears and heavy haze, or as a light compound on a newer vehicle. Non-filling and silicone free, it is one of the most useful bottles in the lineup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinor abrasive, real range:\u003c\/strong\u003e Enough cut to clear heavy haze or lightly correct, then it finishes down to a clean, glossy result.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong cycle time:\u003c\/strong\u003e Stays workable, so you control the finish through your passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo fillers:\u003c\/strong\u003e Crisp, true reflections you can trust, not a temporary shine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e HDO orange foam or the EdgeGuard yellow pad for polishing. For light correction, a microfiber polishing pad or the Tango microfiber polishing pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for super-soft clears:\u003c\/strong\u003e It is not as fine as Classic Finish Plus. On very soft clear coats, use Classic Finish Plus on a black foam pad since it is finer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFinal polish\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply 2 to 3 dots to prime the pad.\u003c\/li\u003e\n\u003cli\u003eUse light down pressure on your first pass, then lighten up.\u003c\/li\u003e\n\u003cli\u003eCycle the product until it goes clear, then wipe off and inspect.\u003c\/li\u003e\n\u003cli\u003eIf you still have haze, recycle the section with a faster arm speed, check it, and move on to the next panel.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eLight correction\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse the Tango or a microfiber polishing pad. Prime the pad first, working the product into the fibers.\u003c\/li\u003e\n\u003cli\u003eCorrect the panel just as you would with a normal compound.\u003c\/li\u003e\n\u003cli\u003eFollow with Classic Finish Plus on a black foam pad for softer clears, or Classic Polish on an HDO orange foam pad to polish out any light marring from the correction step.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eA spritz of Shine Mist extends the cycle and helps the polish finish down.\u003c\/li\u003e\n\u003cli\u003eFollow with Classic Finish Plus on a black foam pad for soft clear coats, or jump straight to your protection of choice (ceramic coating or wax).\u003c\/li\u003e\n\u003cli\u003eKeep it on a dual action for the best, most controllable finish.\u003c\/li\u003e\n\u003cli\u003eWorks on all paint types.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":4152674371,"sku":"SHS496-01-002","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/files\/Classic_Polish_32oz_b4d26edc-a84a-41f5-8afe-4d01f869b8ad.jpg?v=1689273824"},{"product_id":"classic-polish-gallon","title":"Classic Polish - Gallon","description":"\u003ch1\u003ePOLISH WITH A KICK.\u003c\/h1\u003e\n\u003cp\u003eClassic Polish is a diminishing-abrasive polish with a minor cutting ability, which lets it pull out heavier haze and polish harder clear coats while still finishing crystal clear in one step. The long cycle time makes it versatile: run it as a final polish on harder clears and heavy haze, or as a light compound on a newer vehicle. Non-filling and silicone free, it is one of the most useful bottles in the lineup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinor abrasive, real range:\u003c\/strong\u003e Enough cut to clear heavy haze or lightly correct, then it finishes down to a clean, glossy result.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong cycle time:\u003c\/strong\u003e Stays workable, so you control the finish through your passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo fillers:\u003c\/strong\u003e Crisp, true reflections you can trust, not a temporary shine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e HDO orange foam or the EdgeGuard yellow pad for polishing. For light correction, a microfiber polishing pad or the Tango microfiber polishing pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for super-soft clears:\u003c\/strong\u003e It is not as fine as Classic Finish Plus. On very soft clear coats, use Classic Finish Plus on a black foam pad since it is finer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFinal polish\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply 2 to 3 dots to prime the pad.\u003c\/li\u003e\n\u003cli\u003eUse light down pressure on your first pass, then lighten up.\u003c\/li\u003e\n\u003cli\u003eCycle the product until it goes clear, then wipe off and inspect.\u003c\/li\u003e\n\u003cli\u003eIf you still have haze, recycle the section with a faster arm speed, check it, and move on to the next panel.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eLight correction\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse the Tango or a microfiber polishing pad. Prime the pad first, working the product into the fibers.\u003c\/li\u003e\n\u003cli\u003eCorrect the panel just as you would with a normal compound.\u003c\/li\u003e\n\u003cli\u003eFollow with Classic Finish Plus on a black foam pad for softer clears, or Classic Polish on an HDO orange foam pad to polish out any light marring from the correction step.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eA spritz of Shine Mist extends the cycle and helps the polish finish down.\u003c\/li\u003e\n\u003cli\u003eFollow with Classic Finish Plus on a black foam pad for soft clear coats, or jump straight to your protection of choice (ceramic coating or wax).\u003c\/li\u003e\n\u003cli\u003eKeep it on a dual action for the best, most controllable finish.\u003c\/li\u003e\n\u003cli\u003eWorks on all paint types.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":4151923587,"sku":"SHS496-01-003","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/products\/Z-221011-Shine_Classic_Polish_Gallon.jpg?v=1666214376"},{"product_id":"new-slick-back-16oz","title":"Slick Back Ceramic Polish - 16oz","description":"\u003ch1\u003ePRIME IT. MAINTAIN IT.\u003c\/h1\u003e\n\u003cp\u003eSlick Back is our ceramic-infused polish, built to do two jobs. As a primer polish, it removes light imperfections, lays down a candy-like gloss, and deposits a layer of SiO2 that strengthens the bond with your ceramic coating. As a maintenance polish, it gently refreshes a ceramic-coated vehicle, clearing light defects and restoring clarity without compromising the existing coating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic-infused:\u003c\/strong\u003e Polishes while depositing SiO2 that primes the surface for a coating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo jobs, one bottle:\u003c\/strong\u003e A coating-prep primer polish and a once-a-year maintenance polish for coated vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCandy gloss:\u003c\/strong\u003e Removes light imperfections and brings up a rich, glossy finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e The HDO orange foam pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual action only:\u003c\/strong\u003e Built for a DA on a foam polishing or finishing pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot a compound:\u003c\/strong\u003e Slick Back lightly polishes a ceramic-coated vehicle without removing the coating. We reach for it on ceramic coating maintenance details.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMaintain a coated vehicle\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRun Slick Back on an HDO orange foam pad to polish out light imperfections in the coating.\u003c\/li\u003e\n\u003cli\u003eFollow with Relock to keep full surface protection. This is how we maintain coatings, usually once a year.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePrep before a fresh coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse an HDO orange foam pad to polish out moderate haze. Apply 4 dime-size dots and work a 2 ft by 2 ft section at a time.\u003c\/li\u003e\n\u003cli\u003eBecause it primes the surface, skip the heavy wipe down. Throw Back is our IPA panel wipe, so do a light wipe with it to remove any heavy polish residue, then go straight to coating.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAs a maintenance polish, always follow with Relock to maintain protection.\u003c\/li\u003e\n\u003cli\u003eWhen prepping for a coating, use Throw Back as a light panel wipe so you preserve the primer layer.\u003c\/li\u003e\n\u003cli\u003eFollow with Beadlock Pro or Beadlock Black ceramic coating for prep jobs.\u003c\/li\u003e\n\u003cli\u003eWorks on all paint types.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":15745108742,"sku":"SHS105-01-001","price":36.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/files\/Slick-Back-Updated-16_83dc64fa-49b5-44a6-a27d-cb673c4be3a8.jpg?v=1753141420"},{"product_id":"chop-top-32oz","title":"Chop Top - 32oz","description":"\u003ch1\u003eDEFECTS BEWARE.\u003c\/h1\u003e\n\u003cp\u003eChop Top is our highest-cutting compound, with zero fillers and a cut aggressive enough to remove up to 1500-grit sand scratches and severe defects on the hardest clear coats. Because it is a diminishing abrasive, it still finishes down to an impressive gloss, which is rare for something this aggressive. It was designed for a rotary and wool pad but works excellent on a dual action too.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cut:\u003c\/strong\u003e Removes severe defects and sand scratches on even the hardest clears, saving real time on heavy correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStill finishes well:\u003c\/strong\u003e The diminishing abrasive refines as it breaks down, so it leaves a surprisingly clean finish for a heavy cutter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero fillers, VOC compliant:\u003c\/strong\u003e Body-shop friendly correction with no fillers masking the result.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e The Deck Hand White medium-cut wool pad on gel coat, or a microfiber cutting pad on clear coat. On a dual action, use Uro-fiber on hard paint or HDO blue foam on softer paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoost your cut:\u003c\/strong\u003e We sometimes add a little Chop Top to the same pad as Classic Cut to give a job a bit more cutting power when it needs it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRotary\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRun a wool or cutting pad with a slow, controlled arm speed so the compound can maximize its cut.\u003c\/li\u003e\n\u003cli\u003eWipe and inspect.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eDual action\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse a microfiber cutting pad and work the section with slow passes and moderate pressure.\u003c\/li\u003e\n\u003cli\u003eWipe and inspect.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eA spritz of Shine Mist extends the cycle time.\u003c\/li\u003e\n\u003cli\u003eOn gel coat, follow your Heavy Cut step with Chop Top on a Deck Hand wool pad, then move to Wake Up.\u003c\/li\u003e\n\u003cli\u003eOn clear coat, follow with Classic Polish on an HDO orange foam pad.\u003c\/li\u003e\n\u003cli\u003eSkip it on single-stage paint.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":15747138566,"sku":"SHS386-01-002","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/files\/Chop_Top_32oz_f75eb3ce-40e3-4d84-bc56-2ef40527e786.jpg?v=1689273806"},{"product_id":"chop-top-gallon","title":"Chop Top - Gallon","description":"\u003ch1\u003eDEFECTS BEWARE.\u003c\/h1\u003e\n\u003cp\u003eChop Top is our highest-cutting compound, with zero fillers and a cut aggressive enough to remove up to 1500-grit sand scratches and severe defects on the hardest clear coats. Because it is a diminishing abrasive, it still finishes down to an impressive gloss, which is rare for something this aggressive. It was designed for a rotary and wool pad but works excellent on a dual action too.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cut:\u003c\/strong\u003e Removes severe defects and sand scratches on even the hardest clears, saving real time on heavy correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStill finishes well:\u003c\/strong\u003e The diminishing abrasive refines as it breaks down, so it leaves a surprisingly clean finish for a heavy cutter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero fillers, VOC compliant:\u003c\/strong\u003e Body-shop friendly correction with no fillers masking the result.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e The Deck Hand White medium-cut wool pad on gel coat, or a microfiber cutting pad on clear coat. On a dual action, use Uro-fiber on hard paint or HDO blue foam on softer paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoost your cut:\u003c\/strong\u003e We sometimes add a little Chop Top to the same pad as Classic Cut to give a job a bit more cutting power when it needs it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRotary\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRun a wool or cutting pad with a slow, controlled arm speed so the compound can maximize its cut.\u003c\/li\u003e\n\u003cli\u003eWipe and inspect.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eDual action\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse a microfiber cutting pad and work the section with slow passes and moderate pressure.\u003c\/li\u003e\n\u003cli\u003eWipe and inspect.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eA spritz of Shine Mist extends the cycle time.\u003c\/li\u003e\n\u003cli\u003eOn gel coat, follow your Heavy Cut step with Chop Top on a Deck Hand wool pad, then move to Wake Up.\u003c\/li\u003e\n\u003cli\u003eOn clear coat, follow with Classic Polish on an HDO orange foam pad.\u003c\/li\u003e\n\u003cli\u003eSkip it on single-stage paint.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":15747334534,"sku":"SHS386-01-003","price":218.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/products\/Z-221011-Shine_Chop_Top_Gallon.jpg?v=1666214247"},{"product_id":"burn-out-16oz","title":"Burn Out - 16oz","description":"\u003ch1\u003eNO ONE HAS TIME TO BURN.\u003c\/h1\u003e\n\u003cp\u003eBurn Out is our one-step polish: it corrects and finishes in a single step while priming the surface with SiO2 as you work. Built with diminishing abrasives, it delivers true correction with a great cut and a finish that holds its own, and it works in direct sun. Because it leaves an SiO2-primed surface, it is the move right before a ceramic coating or sealant, similar to how Slick Back primes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-step correct and finish:\u003c\/strong\u003e Cuts defects and finishes out very well in a single pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimes with SiO2:\u003c\/strong\u003e Leaves the surface primed for a coating or ceramic sealant. Note the SiO2 is a primer, not a standalone protectant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks in the sun:\u003c\/strong\u003e A strong choice for outdoor and mobile work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow dust, easy wipe-off:\u003c\/strong\u003e Clean to work with, panel after panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e The Tango microfiber polishing pad for more cut, or the HDO orange foam pad for more clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot full correction:\u003c\/strong\u003e For deep multi-step paint correction, use a dedicated compound. Burn Out is built for efficient one-step jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrime the pad: the Tango microfiber polishing pad for more cut, or the HDO orange foam pad for more clarity.\u003c\/li\u003e\n\u003cli\u003eWork a 2 ft by 2 ft section with slow, overlapping passes.\u003c\/li\u003e\n\u003cli\u003eWipe with a clean microfiber towel.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFor more cut, use the Tango microfiber polishing pad. You will get a little more haze but more cutting power.\u003c\/li\u003e\n\u003cli\u003eFor better clarity, use the HDO orange foam pad.\u003c\/li\u003e\n\u003cli\u003eIf you ran Burn Out as a cutting compound with the Tango pad and have light haze left, refine it with Slick Back on an HDO orange foam pad.\u003c\/li\u003e\n\u003cli\u003eGreat for single-stage polishing.\u003c\/li\u003e\n\u003cli\u003eFollow with a Beadlock ceramic coating or a sealant. Burn Out primes the surface for it.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":38532709836,"sku":"SHS367-01-001","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/products\/Shine_Burnout_16oz.jpg?v=1648683966"},{"product_id":"classic-finish-16oz","title":"Classic Finish Plus - 16oz","description":"\u003ch1\u003ePURSUE PERFECTION.\u003c\/h1\u003e\n\u003cp\u003eClassic Finish Plus is the finest polish we offer. It works amazing on soft clear coats and softer paints like black, where it refines out minimal marring and leaves the paint looking perfect. Built with an exclusive blend of small micro-abrasives, it is a true finishing polish for that last step before protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall micro-abrasive:\u003c\/strong\u003e Finishes soft, tricky paint to crisp clarity without instilling new marring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo fillers, no residue:\u003c\/strong\u003e Wipes off effortlessly and leaves true reflections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e Any soft foam finishing pad, like the HDO black foam pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial it in:\u003c\/strong\u003e Runs on a dual action at speed 3 to 4 with light arm-down pressure and a faster arm speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for very soft paint:\u003c\/strong\u003e It is very fine, so it will not pull out a heavy amount of haze. It shines on very soft clear coats like GM black, or soft clears where the haze is light, and the small abrasive cleans that right up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply product to a soft black foam pad.\u003c\/li\u003e\n\u003cli\u003eSet the tool to speed 3 to 4. Use light arm-down pressure and a faster arm speed.\u003c\/li\u003e\n\u003cli\u003eWork the section until the haze is gone and the gloss comes up.\u003c\/li\u003e\n\u003cli\u003eWipe with a clean microfiber towel.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOn soft paint, use Classic Polish with a microfiber polishing pad first, then follow with Classic Finish Plus on a black foam pad.\u003c\/li\u003e\n\u003cli\u003eBefore coating, use Throw Back to remove any light residue, then apply your Beadlock ceramic coating.\u003c\/li\u003e\n\u003cli\u003eLight pressure and a fast arm speed are the key. Think of it like shining a shoe on your last final passes.\u003c\/li\u003e\n\u003cli\u003eWorks on all paint types, optimal on soft clear coats.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":8710484459627,"sku":"SHS497-01-001","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/products\/Z-210624-Shine_Classic_Finish_Plus_16oz_1.jpg?v=1625003907"},{"product_id":"chop-top-8oz","title":"Chop Top - 8oz","description":"\u003ch1\u003eDEFECTS BEWARE.\u003c\/h1\u003e\n\u003cp\u003eChop Top is our highest-cutting compound, with zero fillers and a cut aggressive enough to remove up to 1500-grit sand scratches and severe defects on the hardest clear coats. Because it is a diminishing abrasive, it still finishes down to an impressive gloss, which is rare for something this aggressive. It was designed for a rotary and wool pad but works excellent on a dual action too.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cut:\u003c\/strong\u003e Removes severe defects and sand scratches on even the hardest clears, saving real time on heavy correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStill finishes well:\u003c\/strong\u003e The diminishing abrasive refines as it breaks down, so it leaves a surprisingly clean finish for a heavy cutter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero fillers, VOC compliant:\u003c\/strong\u003e Body-shop friendly correction with no fillers masking the result.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e The Deck Hand White medium-cut wool pad on gel coat, or a microfiber cutting pad on clear coat. On a dual action, use Uro-fiber on hard paint or HDO blue foam on softer paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoost your cut:\u003c\/strong\u003e We sometimes add a little Chop Top to the same pad as Classic Cut to give a job a bit more cutting power when it needs it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRotary\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRun a wool or cutting pad with a slow, controlled arm speed so the compound can maximize its cut.\u003c\/li\u003e\n\u003cli\u003eWipe and inspect.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eDual action\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse a microfiber cutting pad and work the section with slow passes and moderate pressure.\u003c\/li\u003e\n\u003cli\u003eWipe and inspect.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eA spritz of Shine Mist extends the cycle time.\u003c\/li\u003e\n\u003cli\u003eOn gel coat, follow your Heavy Cut step with Chop Top on a Deck Hand wool pad, then move to Wake Up.\u003c\/li\u003e\n\u003cli\u003eOn clear coat, follow with Classic Polish on an HDO orange foam pad.\u003c\/li\u003e\n\u003cli\u003eSkip it on single-stage paint.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":16901631737969,"sku":"SHS386-01-007","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/products\/Z-220819-ShineSupply_Chop_Top_16oz.jpg?v=1661182086"},{"product_id":"wake-up-326oz","title":"Wake-Up - 32oz","description":"\u003ch1\u003eWAKE UP YOUR GEL COAT.\u003c\/h1\u003e\n\u003cp\u003eWake Up is our ceramic-fortified, one-step polish and protectant for gel coat. It cleans up light to moderate oxidation, removes stubborn water spots, and leaves a smooth, UV-resistant finish thanks to its diminishing abrasive. The best part is that it doubles as a wax, laying down ceramic-based protection as you polish, so you restore and defend gel coat in one easy step.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-step polish and protect:\u003c\/strong\u003e Restores gloss and lays down protection in a single pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic-fortified:\u003c\/strong\u003e Leaves a smooth, UV-resistant finish that defends the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoves oxidation and water spots:\u003c\/strong\u003e Cleans up light to moderate oxidation and stubborn spots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e The Correcting Marine Foam Pad from Lake Country. Built to be run with a machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs after Heavy Cut:\u003c\/strong\u003e We love it as the refine-and-protect step after cutting gel coat with Heavy Cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for heavy oxidation:\u003c\/strong\u003e Wake Up will not pull out heavy oxidation. For that, cut first with Heavy Cut, then refine with Wake Up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eShake well. Apply a small amount to a Correcting Marine Foam Pad.\u003c\/li\u003e\n\u003cli\u003eWork it into the surface with moderate pressure on a machine polisher.\u003c\/li\u003e\n\u003cli\u003eAllow the product to haze, then wipe off with a clean microfiber towel.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFor extra protection, follow with Skipper Boat Wax on the Polishing Marine Foam Pad, or with Beadlock Marine.\u003c\/li\u003e\n\u003cli\u003eWake Up cleans up stubborn water spots, but it will not remove spots that are heavily etched into the gel coat. Those need to be compounded out first.\u003c\/li\u003e\n\u003cli\u003eUse it right after Heavy Cut to refine the marring and protect in one step.\u003c\/li\u003e\n\u003cli\u003eKeep the boat up with Aftermath after it comes out of the water to prevent hard water spot buildup down the road.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":42049001029804,"sku":"SHS-368-01-002","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/files\/Wake-Up-32oz-Studio.jpg?v=1744070562"},{"product_id":"classic-cut-16oz","title":"Classic Cut Plus - 16oz.","description":"\u003ch1\u003eCLEARLY BETTER.\u003c\/h1\u003e\n\u003cp\u003eClassic Cut Plus is Classic Cut with an upgraded abrasive blend, so it cuts more and finishes out cleaner. It removes swirl marks, oxidation, and more severe defects, and it shines on harder paints that resist correction. Because it finishes out very well for a cutting compound, your follow-up polish step goes faster, which is why it is the move when you want a stronger cut and a cleaner finish than Classic Cut in one bottle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgraded abrasive:\u003c\/strong\u003e A consistent cut with a long cycle time and strong finishing ability, even on hard clear coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishes out well:\u003c\/strong\u003e For a cutting compound it leaves a clean finish, which speeds up your follow-up polish step.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero fillers, easy wipe-off:\u003c\/strong\u003e Real correction with minimal dusting and a clean wipe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads we pair with it:\u003c\/strong\u003e Microfiber cutting pad or the Tango microfiber cutting pad on a dual action, or wool on a rotary. Correcting soft paint, drop to a microfiber finishing pad on a dual action.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhy pick it over Classic Cut:\u003c\/strong\u003e Reach for it when you want a faster cut and a cleaner finish, harder paint included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which compound or polish is right for your job?\u003c\/strong\u003e Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 \u003ca href=\"https:\/\/shinesupply.mom\/blogs\/news\/compounds-and-polishes-guide\"\u003e\u003cstrong\u003eRead the Compound \u0026amp; Polish Guide\u003c\/strong\u003e\u003c\/a\u003e →\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDual action\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePrime a microfiber pad and spread product over a 2 ft by 2 ft area.\u003c\/li\u003e\n\u003cli\u003eRun the dual action at speed 5 or 6 with slow passes and moderate pressure.\u003c\/li\u003e\n\u003cli\u003eCycle the section until it is clean, then wipe clean and inspect.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eRotary\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse a wool pad and work the section to cut, keeping a controlled arm speed.\u003c\/li\u003e\n\u003cli\u003eWipe clean and inspect.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eDetailer Tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOn a dual action use microfiber pads. On a rotary use wool.\u003c\/li\u003e\n\u003cli\u003eFor softer paint, use a microfiber polishing pad.\u003c\/li\u003e\n\u003cli\u003eBrush out the pad between passes. Cleaning the pad and brushing up the fibers boosts your cut and reduces marring.\u003c\/li\u003e\n\u003cli\u003eAlways follow with Classic Finish Plus or Classic Polish to remove any light haze after your compounding step.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blending Company","offers":[{"title":"Default Title","offer_id":42354285215916,"sku":"SHS499-02-001","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8097\/products\/Classic_Cut_Plus_16oz.jpg?v=1680631858"}],"url":"https:\/\/shinesupply.mom\/collections\/compounds-and-polishes.oembed","provider":"Shine Supply","version":"1.0","type":"link"}