Doing a RV this is the product to remove the oxidation
Burn Out - 16oz
NO ONE HAS TIME TO BURN.
Burn Out is our one-step polish: it corrects and finishes in a single step while priming the surface with SiO2 as you work. Built with diminishing abrasives, it delivers true correction with a great cut and a finish that holds its own, and it works in direct sun. Because it leaves an SiO2-primed surface, it is the move right before a ceramic coating or sealant, similar to how Slick Back primes.
- One-step correct and finish: Cuts defects and finishes out very well in a single pass.
- Primes with SiO2: Leaves the surface primed for a coating or ceramic sealant. Note the SiO2 is a primer, not a standalone protectant.
- Works in the sun: A strong choice for outdoor and mobile work.
- Low dust, easy wipe-off: Clean to work with, panel after panel.
- Pads we pair with it: The Tango microfiber polishing pad for more cut, or the HDO orange foam pad for more clarity.
- Not full correction: For deep multi-step paint correction, use a dedicated compound. Burn Out is built for efficient one-step jobs.
Not sure which compound or polish is right for your job? Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 Read the Compound & Polish Guide →
How to Use
- Prime the pad: the Tango microfiber polishing pad for more cut, or the HDO orange foam pad for more clarity.
- Work a 2 ft by 2 ft section with slow, overlapping passes.
- Wipe with a clean microfiber towel.
Detailer Tips
- For more cut, use the Tango microfiber polishing pad. You will get a little more haze but more cutting power.
- For better clarity, use the HDO orange foam pad.
- If you ran Burn Out as a cutting compound with the Tango pad and have light haze left, refine it with Slick Back on an HDO orange foam pad.
- Great for single-stage polishing.
- Follow with a Beadlock ceramic coating or a sealant. Burn Out primes the surface for it.
Burn Out - 16oz
Sale price$32.00
Regular price
Choose options
Burn Out - 16oz
Sale price$32.00
Regular price
Customer Reviews
Overall rating: 5.0 / 5 from 33 reviews.
Love this product
So simple to use. Followed the instructions on the bottle and the Pro Tips. Car came out fantastic. Topped with Cherry
Poor lighting and photo, but the right side is after just one pass with burnout and an orange foam pad. The clear coat has been failing on the hood of my wife's car for a while now and I've tried other products with minimal results. I honestly thought it was at the stage of just a repaint situation, but Burnout made a huge difference. It will be a long time now before I plan on getting anything repainted. I'll be using Burnout on my 20 year old truck next!
This stuff is universal and is the real deal.
Buffing the original 1955 paint. Very impressive product. Great technical support.
Works wonders
Easy to work with, great customer service. Will continue to use shine supply.
Burn out is awesome. I’m a DYI not a professional at all. Burn out brought out the shine on my truck and made a huge difference on my A pillars on the door jams. Combine this with some clutch 🔥
A combination of Burn out and Cherry Ceramic wax worked wonders on my trailer. I did call customer service to try and figure out what would work best before ordering; The customer service guys nailed it. I did have to deviate from the normal polishing instructions by using a wool pad and a rotary buffer. A DA would have doubled my time and effort. I needed the wool pad to contour to the trailer screws.
I use this product on cars that the owners have neglected. It is great at bringing back shine, removing water spots, and oxidation removal. I also use this as a finishing polish on gel coats. Literally just 4-5 pea sized drops on a firm 6” foam pad and go to town. I can polish a car in about an hour, very quick. The photo is a black Jeep Grand Cherokee. The owner said she just wanted a wax. If I just waxed it, it would have looked like the right side of the photo.. but I polished it knowing that it would look a night and day difference. Product lasts a very long time because you use so little of it.
Love the quick delivery and product!
I have used this product on several occasions, and it worked great! The first time I used it was to correct etching in my paint left from a bird bomb. The etching was in a tight area, so I used a small blue applicator pad to work the product over the affected area. This process removed all of the etching, leaving the paint smooth and shiny. I followed this up with a quick coat of Ride Shine followed by Punch It. This was a quick and easy process that worked perfectly. The other time I used it was with a polisher and an HDO Orange Foam Cutting/Polishing Pad for some basic paint correction on a larger area of my vehicle. I had great results with this project as well.
Works great on restoring my Vossen HF-5 wheels
Great product for restoring stained non-porous plastic trim!
Worked perfectly
The product was very easy to use and my car looks fantastic. Great customer service and i would highly recommend to any friend.
Good
I was beyond curious to try this product out. Finally pulled the trigger. Used on my coworkers white Acura. Let’s just say after proper prep. The panels were glowing. Cannot wait to see how it looks on my dark gray Honda. You did it AGAIN mr Jeremy!!!
Used this on my 19 Tacoma, and along with the Buff-N-Shine Euro Pads, worked perfectly! Easy to use and did an excellent job of removing any light defects that had been accrued over the past year. Topped Burn Out with a Cherry/Clutch combo!!!
Best AIO out there. Combine Burnout with Clutch and you'll get mind blowing gloss. If used with a Lake Country Blue Hybrid Wool pad this stuff will take out 1500 grit sanding marks and still finish like a fine polish. I highly recommend Burnout. I've done paint correction & paint enhancements for 40 yrs. and this is the real deal.
This stuff is great. Has a nice cut to it, leaves the paint glossy and ready to finish. Doesn't ever get dusty which means cleanup is quick. If you don't get the results on the first pass, simple add a little more and hit it again. Topped off with Daddy-O and the finish is smooth as glass!
I was very curious about burnout for some time. Finally added to an order i placed and tried it for the first time on a Jeep Wrangler the other day. I was blown away at the results achieved in such little time. Didn’t even cycle this product out and still removed I’d say 80% atleast of defects on a thrashed Jeep. Needless to say, this is now my go to one step
Been using this product since it was released, perfect 1 step polish for being a mobile detailer. Long cycle time, beautiful cut with a unbelievable finish. Slinging that Sio2 gloss. Stack this product with clutch for the ultimate finish 💯 give it a shot won’t be disappointed.
I wasn't a true believer in One Steps. This one takes time. Work it in, let it break down, Wipe off, BOOM! Corrected and Polished in One Step
Had a chance to work on a good friends new black Escalade that was receiving a ceramic coating. I wanted to use Burn Out so I could do a one step enhancement and also prime the surface with Si02. It was my first time using Burn Out and it worked well. I started with an HDO orange pad in my test stop and found I needed a little more correction so I switched to a microfiber finishing pad. Upon inspection I noticed there was some slight micro-marring to clear up. By watching and learning from Jeremy's videos he's mentioned it’s OKAY to do quick second step even if the project was going to be a one-step enhancement if the little time spent delivers exceptional results. Here’s what I did that saved time yet delivered awesome gloss enhancement. After I cycled Burn Out, I left it on the section without removing it and switched to a black foam pad with a couple dots of Slick Back. Jeremy always stresses using products with "like" ingredients. Since both are fortified with Si02 Slick Back worked perfect to clear up the micro-marring left from the mf pad. Then I wiped that panel removing both Burn Out and Slick Back and bam! This process delivered more correction and better enhancement while not taking a lot more time. The best is that since both have Si02 there wasn’t a need for Throw Back in between or during the final wipe which again saved time. The final results were insane!
I've used several products for correction & enhancement. Burn out is by far the best I've ever had the pleasure of using. Super easy to apply & wipe clean. What a finish!
Just used burn out today with an array of pads on metallic black paint. Its 103 Degrees today so the black paint heated up real fast. I used a trick I learned from Darren Priest (Auto Fetish). I laid wet water sprites where I was going to work next... worked pretty well.... The burn out removed probably 50- 60 % of the scratches in this vehicle and 100% of the holograms from a rotary machine in the hands of a person either lacking experience or in a hurry! It's a recently purchased used car!! Anyway, Burn out is IMPRESSIVE! LOVE THUS STUFF!! I will be using this a lot more in the future.
95% of my jobs are mobile and in horribly shaded areas. This product laughs at that and turns out results that can only be described as miraculous. With next to no dusting, a great finish, and a super concentrated formula; Burn Out is a MUST HAVE.
One of the most versatile products in this industry. A must have in all detailers arsenal. A nice cut with a beautiful finish.
In my opinion, this is my most coveted product in my detailing arsenal. A little product goes a long way with Burn Out. Any vehicle needing a true one step correction that I touch gets Burn Out. A solid one step product that offers awesome protection capabilities as well. Jeremy killed it with product!
This is exactly what I was looking for. Great cut. Great finish. Great Primer. easy on and off even in sunlight and heat. Thanks Shine Supply!
Just got a bottle of this last week and used this weekend on a mobile project for two vehicles. Gave me what I was looking for, great gloss and a great base for Clutch.